Product Mode： Fixed mode of products： Test Speed： Number of tests： Equipment size： Description: Wire wear testing equipment, capable of resisting tensile forces applied externally for 40,000 cycles. With flexible connections, it can undergo tensile and wear testing under external forces. Start the equipment for trial operation, observe the weight during the movement of the push rod. Throughout the entire process, the lower end of the weight should be at least 100mm away from the tabletop, and the upper end of the weight should be at least 100mm away from the bottom of the pulley. Adjust the length of the hose until the conditions are met. Reset the counter and start running it for a total of 40,000 cycles, checking the sample status every 5,000 cycles. The sample surface should show no obvious signs of damage, cracking, or excessive wear; if there are reinforced metal wires inside, they should not break or undergo severe deformation. After 40,000 cycles of testing, the sample surface should show no obvious signs of damage, cracks, or excessive wear; if there are reinforced metal wires inside, they should not break or undergo severe deformation. This machine complies with testing standards such as UL, CSA, GB, ASTM, VDE, and IEC.