The rotary switch component life test bench is mainly suitable for continuous and periodic rotary life testing of rotary switch components. Under normal temperature conditions, conduct a long-term on/off rotation life test on the tested rotary button through system settings and control. The entire equipment system is controlled by a PLC program, with manual quick installation and one click start testing mode.

Adopting a stepper servo drive method and controlled by a PLC program, the stepper servo motor is tested for its forward and reverse motion life at an angle of 90-0-90 degrees. Realistic simulation of actual usage environment. The equipment is controlled by PLC and operated on a 7-inch touch screen. Perform multi angle testing on the rotating buttons of each workstation and judge based on the on/off status of IO signals. The control system is independently developed PLC control. Adopting PLC and 7-inch touch screen control system, the equipment operation is controlled through. Control system with functions such as abnormal and fault alarms