1. Brief description

The ignition life test device is designed according to the technical requirements specified in Clause 7.7 GB/T 38522-220 "Outdoor Gas Burning Appliances", QB/T2365, CJ/T 41-2013, GB16410 and GB16411 standards, and is suitable for the performance test of the pulse ignition controller of gas.

Product features

1. Test: Pulse ignition life aging test

2. On/Off time/number control: Settable 0-99999

3. PLC 7-inch touch screen control is adopted

4. Test position: 5;

5. Working power supply: AC 220V ±10%, 5Hz;

6. Output voltage range: DC 0 ~ 5V.

7. Output current value: 0-2.5

8. Total test times: Can be preset 0 ~999999 times.

9. Working position test counter: 0 ~ 99999 times (count independently for each working position).

10. Ignition time: 0 ~ 9999S is possible.

11.ition stop time: 0 ~ 9999S is adjustable.

12. This test can be switched between single coil thermocouple type and double coilocouple type pulse ignition.

13. Test process for testing single coil thermocouple type pulse ignition: Start, ignition power supply, left and right ignition signals connected, the ignition device starts to ignite, the ignition time is up (time 0-9999S is adjustable), the ignition signal is disconnected, the stops, the stop time is up (time 0-999S can be), and the next cycle is performed.

14. Test process for testing double thermocouple type pulse ignition (delay ignition type): Start, ignition power supply, left and right ignition signals are connected to start ignition, ignition signal is disconnected, ignition time up (ignition time 0-99S is adjustable), ignition stops, stop time is up (stop time 09999S is adjustable), the next cycle is performed.

15. Test process for testing double coil thermocouple type pulse ignition (non-delay ignition type): Start, ignition power supply, and right ignition signals are connected, ignition device starts to ignite, ignition time is up (ignition time 0-99S is adjustable), ignition stops, stop is up (time 0-9999S is adjustable), and the next cycle is performed.