Product Mode： Fixed mode of products： Test Speed： Number of tests： Equipment size： Description: The wire wear resistance testing equipment has the ability to resist 40000 tensile tests under external force. Flexible connection, capable of tensile and wear testing under external force. Start the equipment for trial operation, observe the weight during the movement of the push rod, and ensure that the lower end of the weight is at least 100mm away from the table and the upper end of the weight is at least 100mm away from the bottom of the pulley. Adjust the length of the hose until the conditions are met. The counter is reset and starts running, running 40000 times in total, checking the sample status every 5000 times. There is no obvious damage, cracking, excessive wear or other phenomena on the surface of the sample; If there is a reinforced metal wire inside, the wire should not break or deform severely. After 40000 tests, there were no obvious damages, cracks, excessive wear or other phenomena on the surface of the sample; If there are reinforced metal wires inside, the wires should not break or deform severely.. This machine complies with UL, CSA, GB, ASTM, VDE, IEC and other testing standards.