Product Mode： Fixed mode of products： Test Speed： Number of tests： Equipment size： Description: 1. The size of the robot life test frame is 1800mm high x 1500mm wide x 1500mm long, and it is placed in three layers 2. Three stations can operate independently; 3. Test floor: marble tile, solid wood floor, short-haired ASTM standard LEVEL LOOP carpet, 20mm smooth pine board 4. A 4cm high protective bumper is installed around the surface of each layer of the test device. The protective bumper must have sufficient strength to meet the impact of the robot during operation. 5. The three robots on each set are powered by DC power 6. Controlled by a PLC control system, for the control system and display interface 7. 360-degree conductive ring to realize mobile power supply without dead angle 8. PLC monitoring, voltage and current detection for each station and record test data