1 climbing obstacle equipment according to customer requirements, mainly by profiles and sheet metal assembly, the test platform is composed of 1M X 2m double-layer frame. The test equipment is divided into two halves, half of which can dynamically adjust the angle through program control. The angle between the two plates can be adjusted from 0 to 45 degrees, and the angle accuracy is 1 degree. The angle adjustment is set and controlled by the touch screen, the equipment adopts electric servo cylinder to adjust the test angle, through setting different angle to test, judge whether the product is slipping back and carry on the comprehensive evaluation test of climbing obstacle performance. 1.2 using two platform structure, the angle between the two plates can be adjustable angle 0-45 degrees, the maximum angle 50 degrees, 1.3 platform set up three obstacles, every meter set up one, height independent adjustable (1CM-5CM) .

Technical Parameters 1, platform size: 1mx2m2, Angle adjustable range: 0-45 degrees adjustable 3, test floor: pine, Tile 4, obstacle height adjustable: 0-50MM 5, Angle Drive: servo cylinder 6, display mode: 7-inch Touch Screen Display 7, device power: 220V 1.5 kw 8, device size: 2000X100X650 unit mm