Ultra-high pressure water hammer pulse blasting life testing machine, mainly for high-pressure products custom-made, equipment to meet the test products ultra-high pressure withstand test, high-pressure pulse test and blasting test. Through the frequency conversion of high-pressure pump to test the liquid on the product's high-pressure, pulse performance of the long-term use of simulation test. And the test of the product to carry out a comprehensive use of the working condition evaluation.

2. The testing machine is controlled by Mitsubishi PLC, and the inverter high-pressure power pump is the main power source. The pressure is output and controlled by analog signal. Test machine with test data recording function and support USB data export.

3. The box body is made up of external dusting and internal 304 assembling. With over-temperature, over-pressure, water leakage alarm and automatic shutdown function.

Main technical parameters:

1. Pulse pressure: 1 ~ 20Mpa

2Pressure Range: 1-20mpa

3, pressure accuracy: ± 1% accuracy 0.25 grade

4, pressure rate: about 2MPA/s

5.Constant pressure time: 1-99999s

6, Cycle Pressure: 0-10mpa

7, Cycle Frequency: 1-30 times/min

8, cycle number: 200,000 times/test

9, test number: 1,

10, display mode: curve/numerical value

11, test medium: normal temperature tap water (optional water thermostat function)

12, drive source: frequency conversion high-pressure water pump + gas pump

13, control mode: PLC + touch screen settings, source: 0.6 mpa

14.Power: 220V 50HZ 6.5 kw

15, equipment size: 2150X1450X1680MM (according to customer samples)