The torsion and swing test-bed of vacuum cleaner is mainly used to test the torsion and swing life for a long time at the positions of the handle rotating shaft and the ground brush rotating shaft of vacuum cleaner. The two ends of the handle of the vacuum cleaner are clamped and fixed by the clamp, and the servo drive mechanism drives the handle to rotate and swing continuously. The torsion angle can be stepless adjusted according to the positive and negative 360-0-360 of the PLC, the torsion speed can be set according to the realization test of 0-100 rpm.

Main technical parameters

1. Test Station: 2-10 station independent test

2. The size of the test-bed is 800 × 600mm

3. Test torsion angle: 360-0-360 degrees can be adjusted arbitrarily

4. Horizontal swing angle: 90-0-90 degrees can be adjusted arbitrarily

5. Control mode: PLC 7 inch touch screen display

6. Detection Voltage: AC, DC switching detection (optional) 

7. Count/time adjustable range: 0-9999999 times

8. Test mode: Test Times/time on-off setting

9. Drive source: servo motor, floor: pine floor

10. Equipment power supply: 220V 2.5 kw

11. Equipment size: 1680X1250X1450 unit MM