The fishing and flapping test-bed of vacuum cleaner is mainly for the endurance test of the entire machine, mainly for the handle, ground brush strength, internal components and other comprehensive strength durability life test. The two ends of the handle of the vacuum cleaner are clamped and fixed by the clamp, and the fishing flapping test of the vacuum cleaner is carried out by the transmission mechanism of the decelerating motor. The test bench is controlled by PLC program and related parameters are set and recorded by 7-inch touch screen. The equipment has the advantages of stable operation and convenient operation.

Main technical parameters

1. Drive: DC Deceleration Motor

2. Jig Action: Chuck type universal jig

3. Flapping angle: 0-80 degree adjustable

4. Speed: 1-40 r/min can be set arbitrarily

5. Number of times: 0-999999 can be arbitrarily set, test time: 0-999999 can be set

6. Control mode: PLC control 7 inch touch screen3

7. Test station: Independent 1 station test

8. Test floor: Pine Board (optional: Carpet, tile) 

9. Equipment Size: 700 × 1500 × 1350 unit: MM

10. Power: 220V 50HZ 1.5 kw