Centering on domestic and foreign standards, it mainly includes: China National Standards (GB/T): GB/ 4288 (performance), GB 4706.1 and GB 4706.24 (safety) International Standards (IEC IEC 60456 (performance), IEC 60335-2-7 (safety) Other regional standards: UL 215 (USA), EN 60456 (Europe)

Summary: A complete washing machine testing system is a comprehensive laboratory consisting of a variety of equipment mentioned above With these devices, manufacturers can fully control product quality, from "cleaning well", "lasting long" to "absolutely safe", ensuring that products meet market and requirements.

Washing Machine Inlet Valve Durability Life Test, Waterway System Test, Water Hammer Impulse/Pressure Burst Test Machine simulates the drastic fluctuation of pressure in pipes (water hammer effect), and performs pulse pressure tests on the washing machine's inlet pipes, valves, and inner tub, inspecting their pressure resistance and sealing

Washing Machine Inlet Valve Durability Life Test Machine, Inlet valve life test bench is mainly suitable for the continuous and periodic life testing of inlet valve spare parts under constant temperature and pressure. In a normal temperature environment, the tested inlet valve is subjected to a long-term on/off life test through system setting and control. The entire device system controlled by PLC program, quick manual installation, and one-key start of the test mode.

Washing Machine Drum End Face Axial Runout Test Machine, Washing Drum End Face Axial Runout Test Machine, equipment composition: The equipment is mainly divided into three parts: mechanical fixture part, test control part, and operating console. The automatic clamping method of the chuck type is adopted, and the positioning is firm. Parameter setting: Motor speed can be set (maximum speed 1800r/min) operation time; measuring height; measuring distance, runout qualified judgment value, etc., Washing Machine Water Level Sensor Life Test Machine, Washing Machine Inlet Valve D Life Test

Washing Machine Water Level Sensor Life Test Bench is suitable for both electromagnetic and mechanical water level sensors. It is compatible with more than 95% of water sensor products on the market. The test bench is mainly used for long-term life tests of washing machine water level sensors (water level pressure sensors). The test platform uses P control and can adjust the air pressure from 0-20Kpa through a pressure micro-adjust valve, simulating the high and low water level slots inside the washing machine when it is filling with water, and the resulting pressure difference is used to perform the NO/OFF contact on-off test of the water level sensor, EN 604562011 "Method for Performance Testing of Domestic Electric Washing Machines", IEC 60456-2010 EN 6045:2016 prAA:2019, AS NZS2040.1-2021 Australian Energy Consumption, GB 476.1-2005; EN 60335-1 2012, IEC 60335-1 200 "Safety of Household and Similar Use Electrical Appliances-General Part", Washing Machine Inlet Valve Durability Life Test, Washing Machine

www.allison-tm.com/detail/1272?lang=en

www.allison-tm.com/detail/1275