Washing Machine Hanging Rod Damping Force Test Equipment, suitable for washing machine hanging rod damping force, pull force test. Commonly in more than 95% of the washing machine hanging rod products on the market. The test bench simulates the reciprocating damping force value data of the washing machine hanging in the process of actual use, and collects and records the tested force value in real time through the pressure sensor. The action control and force value collection are performed by PLC.ashing machine test equipment, which simulates the action test according to the set test times and running speed, and the PLC reads and records the real-time force value change in time, and generates a curve. And the test data are statistically processed; and then the test report and characteristic curve chart in various required formats are output.

Main technical parameters: machine hanging rod damper damping test equipment

1. Test items: stress rate, constant stress, damping force test

2. Test position: single position

3. Control mode 17-inch industrial computer

4. Motion mechanism: up and down motion

5. Drive mode: servo motor control

6. Force value: 0-00N Accuracy 0.5 grade

7. Stroke adjustment range: 0-300MM

8. Load range: 2--500

9. Displacement accuracy: 0.1MM

10. Clamping method: card installation

GB/T 4288-2018 "lectric washing machines for household and similar purposes, IEC 60335-1 2010 "Safety of household and similar electrical appliances - Particular - Part 1: General requirements"

www.allison-tm.com/detail/1267?lang=en

www.allison-tm.com/detail/1273