I. Brief description:

   According to the relevant test standards for washing machines, 

the equipment meets the requirements for static pressure, progressive, 

and burst pressure tests for products such as balance rings, etc., to perform pressure maintenance 

and extreme pressure tests on the test products with a maximum water pressure of 0.-5.0 Mpa.

 High-precision pressure sensors are used to collect and judge pressure values. 

The pressure is maintained and controlled by the PLC of the testing machine, 

the pressure value is read and recorded in real-time and pressure curves are generated. 

Pressure judgment, leakage judgment, and pressure limit judgment are performed within

 the set upper and lower limits Related tests are completed through related parameter settings and control.

II. Main technical parameters:

1. Pressure: 1—5.0Mpa 0.1

2. Pressure drive mode: Water pump frequency conversion

3. Maximum pressure rise rate: 0-0.2MPa/s

5. Constant pressure time:1--99999s

7. Test mode: Pressure maintenance test, constant pressure progressive test, burst test

8. Number of test circuits: 1 circuit (can be connected in series up to 5 circuits - custom order)

9. Controllable range of water temperature: 10~24 degrees Control accuracy: ±2 (optional)

10. Test medium: Tap water

11. Control screen: 7 inches/17 inches optional (optional)

12. Display pressure: Curve display

13. Power supply: 220V 50HZ 2.5KW

14. Equipment size: 150X750X1650MM

www.allison-tm.com/trade?lang=en

www.allison-tm.com/detail/1277?lang=en