The rotary switch component life test bench is mainly suitable for continuous and periodic rotary life testing of rotary switch components. Under normal temperature conditions, conduct a long-term on/off rotation life test on the tested rotary button through system settings and control. The entire equipment system is controlled by a PLC program, with manual quick installation and one click start testing mode.

Adopting a stepper servo drive method and controlled by a PLC program, the stepper servo motor is tested for its forward and reverse motion life at an angle of 90-0-90 degrees. Realistic simulation of actual usage environment. The equipment is controlled by PLC and operated on a 7-inch touch screen. Perform multi angle testing on the rotating buttons of each workstation and judge based on the on/off status of IO signals. The control system is independently developed PLC control. Adopting PLC and 10 inch touch screen control system, the equipment operation is controlled through. Control the system with functions such as abnormal and fault alarms.